Referent:innen

Dr. Robert Eskes

Dr. Robert Eskes

FAREVA Unterach

Robert G. Schwarz

Robert G. Schwarz

GXP-TrainCon

Dr. Andreas Neubert

Dr. Andreas Neubert

Klocke Holding

Dr. Jörg Weyermann

Dr. Jörg Weyermann

GSK Vaccines

Petra Falb

Petra Falb

AGES - Austrian Agency for Health and Food Ssafety

Dr. Volker Öppling

Dr. Volker Öppling

Paul-Ehrlich-Institut

Dr. Frank Sielaff

Dr. Frank Sielaff

Hessisches Landesamt für Gesundheit und Pflege

Zielsetzung

The development and production of vaccines makes high demands on the manufacturing pharmaceutical industry. The special requirements on handling and safety with live organisms necessitate measures which exceed the requirements of classic pharmaceutical manufacturing.

Topics like the enhanced risk of cross contaminations, questions about individual safety of staff and the issues of cleaning and disinfection of rooms and equipment concern a vaccine manufacturer in a considerable scale.

Specifically, the demands of the necessary bio safety classes with negative pressure of rooms versus that of aseptic processing with positive pressure requires a well thought-out design of vaccine facilities.

Also, the safety of environment and waste disposal should receive proper attention already in the design phase. But the dedicated requirements on staff safety are also a challenge in vaccine manufacturing.

This course will give you the possibility to see the theoretical background as well as the practical implementation of GMP requirements in the vaccine production. A combination of theoretical requirements and practical case studies is the best way to learn this.

Speakers from regulatory bodies, consulting and practising experts will give you the chance to get to know the different views and you will have ample opportunity to discuss specific issues with speakers and other participants

Hintergrund

“Vaccines are expected to be very safe” is one of the headlines in the presentation of the CBER “Vaccine safety team”. At the same time, new vaccines are needed for diseases for which currently no vaccine is available, and production technologies need improvement to deal with the shortage of certain types of vaccines. This has led to the emergence of new technologies. One of the important questions from the authorities however is “How safe are the new technologies”. There are several guidelines from the FDA and other authorities that deal with the safety of the different types of vaccines.

In the development of new technologies for the pharmaceutical and biopharmaceutical production of vaccines again the question of GMP compliance and safety is emphasised.

Furthermore, with the Quality Initiative for the 21st Century from the FDA new guidelines have been issued, which have an impact not just on the conventional pharmaceutical industry but also on vaccine manufacturers. Risk management and quality in design are essential in the implementation of new technologies and the introduction of new vaccines. Ensuring the expected safety is one of the greatest challenges of all vaccine Producers.

Zielgruppe

The course is designed for personnel of pharmaceutical industries, their suppliers and regulatory bodies who
  • are responsible for quality control and/or quality
  • assurance in vaccine/biopharmaceutical production,
  • manage the vaccine production,
  • establish the operator protection,
  • audit vaccine manufacturers,
  • design or operate vaccine production sites.

Presentations / Certificate

The presentations for this event will be available for you to download and print before and after the event.

Please note that no printed materials will be handed out on site and that there will not be any opportunity to print the presentations on site.

After the event, you will automatically receive your certificate of participation.

Programm

GMP for Vaccine Manufacturers

Gesamtes Programm als PDF herunterladen

GMP for Vaccines: What are the Issues?
  • Differences between vaccines and conventional products
  • Inactivated and live vaccines
  • Control of vaccine strains and cell lines
  • Risk of (cross-)contamination
  • (Bio)safety issues
The Peculiarities of Viral Vaccines
  • From viral seeds to finished products
  • Requirements for raw and starting materials
  • Efficient process and product control
  • Setting specifications adequately
  • Appropriate tests and assays for product release
  • Stability testing
  • Viral safety aspects
  • TSE compliance
  • How to deal with OOS results?
  • Requirements for early and late clinical trial phases
Modern Vaccines Part I
  • Vector vaccines
  • Plasmid-DNA vaccines
  • Related regulations
The Peculiarities of Bacterial Vaccines
  • Types of vaccines available
  • Manufacturing of classical/modern bacterial vaccines
  • Challenges in manufacturing  (quality/regulatory issues)
  • New technologies and products
Containment, Biological Safety and Product Protection
  • Containment, product safety versus environmental safety
  • Primary containment and additional measures
  • Negative pressure areas in aseptic manufacturing
  • Decontamination of facilities
  • Personnel as critical component in Containment
Virus Inactivation and Virus Removal Techniques
  • Validation of virus inactivation step
  • Virus inactivation: principles and methods
  • Virus removal Methods
  • GMP issues on virus inactivation and virus removal techniques
Validation of a Decontamination System for Production Equipment, Process Devices and Cleanrooms
  • Different gassing Systems
  • System qualification
  • Validation of a dry fog detergent
Case Study: Concept of Multipurpose Vaccine Production Facility
  • Practical issues with flow of material, personnel and waste material
  • Clean room qualification
  • Segregation of cell preparation, virus production and downstream processing
  • Change over procedures for manufacturing campaigns
Modern Vaccines Part II – GMP Inspectors‘ View
  • Regulatory expectations
  • Classic vaccines
  • Aspects for modern vaccines, e.g. mRNA and protein-based
  • Experiences from inspections
cGMP Issues for Upstream Processing
  • General GMP concerns for upstream processing
  • Raw materials and media preparation
  • Cell culture
  • Virus culture
  • Inactivation of microorganisms
Issues of Staff Safety
  • Requirements and Guidelines
  • Differences vaccines products and plasma products
  • Use of S3 Coveralls
  • Environmental health and safety challenges
  • xamples from daily Business
Case Study: Isolator Filling Line for Vaccines
  • Requirements of design
  • Issues of construction
  • Qualification challenges
cGMP Issues for Downstream Processing
  • General GMP concerns for downstream processing
  • (Ultra)filtration techniques
  • (Ultra)centrifugation techniques
  • Sterile filtration  and aseptic processing
Case Study: GMP Development and Manufacturing of Recombinant Viral Vaccines for Clinical Trials
  • Regulatory expectations for vaccine batches for phase 1/2/3 clinical Trials
  • Development vs. validation
  • Regulatory expectations for implementation of analytical methods – qualification and validation
  • Contract manufacturing of IMPDs

Dieses Seminar/Webinar kann nicht gebucht werden. Alternative Termine für dieses Seminar/Webinar und ähnliche Veranstaltungen finden Sie in der Übersicht nach Thema..

Für viele Seminare und Webinare gibt es auch Aufzeichnungen, die Sie jederzeit bestellen und anschauen können. Diese Aufzeichnungen finden Sie in einer themensortierten Liste.

Oder senden Sie uns Ihre Anfrage einfach über das folgende Kontaktformular.

* auch unkompliziert per Kreditkarte bezahlbar
American Express Visa Mastercard

icon
Weitere Termine vor Ort
Weitere Termine vor Ort nicht verfügbar
icon
Weitere Termine online
Weitere Termine online nicht verfügbar
icon
Aufzeichnung nicht verfügbar

Haben Sie noch Fragen?

Wir stehen Ihnen für weitere Auskünfte gerne zur Verfügung.

Frau mit Headset
Tel.: +49 6221 84 44 0
E-Mail: info@concept-heidelberg.de

Zurück

Teilnehmerstimmen - das sagen andere über unsere Seminare:

"Die Umsetzung mit Memberspot ist wirklich ausgezeichnet gelungen.
Es unterstützt die Wissensvermittlung und gewährleistet auch die richtige Durchführung des Kurses.”
Christian Wagener, WAGENER & CO. GmbH
GMP Basis-Einstiegsschulung (B 1) - Aufzeichnung Online Seminar, April 2024

„Kurzweilig, informativ“
Behrendt, Christian, IOI Oleo GmbH


„Austausch zwischen Teilnehmern & Vortragenden sorgt für Anstöße & Optimierungsmöglichkeiten im eigenen Unternehmen! Praxisnahe Beispiele veranschaulichen und vertiefen die Theorie sehr gut“
Marina Maier, CHEPLAPHARM Arzneimittel GmbH

Abweichungen und CAPA (QS 12)
November 2024

„Danke für das tolle und interessante Seminar! Ich nehme mir fachlich total viel mit und habe viele tolle Menschen kennengelernt.“
Melanie Schifferer, DAIICHI SANKYO EUROPE GmbH
Batch Record Review (QS 23)
September 2024

Guter, breit gefächerter Überblick mit interessanten Verknüpfungen zur Praxis,
welche die Theorie super veranschaulicht.”
Marina Kicoranovic, Labor Hartmann GmbH
GMP/Basis-Einstiegsschulung (B 14), September 2023

Die Referenten waren sehr gut! Sie haben sehr klar gesprochen, nur sehr wenige englische Begriffe
verwendet (super) und waren sehr praxisbezogen.”
Astrid Gießler, Regierungspräsidium Karlsruhe
Live Online Seminar - Basiskurs Computervalidierung & Datenintegrität im GxP Umfeld (B 3), Juni 2023

Sehr guter Bezug zur Schulung für einen GMP-Anfänger. Habe mich sehr gut abgeholt gefühlt.”
Dr. Harald Werner, Infraserv GmbH & Co. Höchst KG
GMP-Basisschulung (B 1), Juni 2023

„Interessante Themen, gut vorgetragen, die eigenen Erfahrungen der Vortragenden helfen, dies noch besser nachzuvollziehen.“ „Gute Gestaltung der Workshops, das Zusammenarbeiten in Gruppen und der Austausch mit anderen hilft sehr.“
Manuela Seibert, Merck, GMP-Leadauditor/in (FA 2), April 2024

NEWSLETTER

Bleiben Sie informiert mit dem GMP Newsletter von Concept Heidelberg!

GMP Newsletter

Concept Heidelberg bietet verschieden GMP Newsletter die Sie auf Ihren Bedarf hin zusammenstellen können.

Hier können Sie sich kostenfrei registrieren.

Kontakt

Kontaktieren Sie uns

Haben Sie Fragen?

Concept Heidelberg GmbH
Rischerstraße 8
69123 Heidelberg

Tel. :+49622184440
Fax : +49 6221 84 44 84
E-Mail: info@concept-heidelberg.de

zum Kontaktformular