header-image

GMP for Medical Devices - Live Online Training

19/20 November 2024

Seminar-Nr. 21424

Referent:innen

Dr. Gerhard Bauer-Lewerenz

Dr. Gerhard Bauer-Lewerenz

Bauer-Lewerenz Consulting

Dr. Cornelia Siegl

Dr. Cornelia Siegl

Marinomed Biotech

Harald Rentschler

Harald Rentschler

mdc medical devices certification

Jesper Wagner

Jesper Wagner

Niras A/S

Zielsetzung

The aim of the course is to identify similarities and differences between the regulations of the FDA and the European regulations for Medical Devices. The focus will be on
  • Classification Rules and Submission in the USA
  • Certification Procedures
  • Technical Documentation vs  Device History File and Device Master Record
  • Combination Products
  • Design Controls
  • Validation / Qualification
  • Regulatory Audits
  • CAPA and Complaint Handling
A Notified Bodies representative will start the course by explaining the regulatory requirements, especially regarding the new EU Medical Device Regulations.

Hintergrund

Since 1996, the requirements for the development, the manufacture and the distribution of medical devices in the USA have been laid down in the revised cGMP regulations for Medical Devices (21 CFR 820, QSR). In the USA, medical devices are regulated by the FDA’s Center for Devices and Radiological Health (CDRH). Inspections  are primarily performed by the FDA.
 
In Europe, three EU directives (90/385/EWG, 93/42/EWG and 98/79/EG) and one amending directives regulate the medical devices industry. In May 2021, the new Medical Device Regulation will come into force. GMP regulations - strictly speaking - are not notified.

Instead, harmonised standards, especially ISO 13485, represent the state-of-the-art in the area of the EU. Inspections are primarily performed by Notified Bodies („New Approach for Product Regulations and Conformity Assessment“).
 
With the revision of the ISO 13485 in 2016 there are also new (“GMP”-) requirements. 
 
Statistical data about deficiencies of medical devices do only exist in the USA because of the Freedom of Information Act. For years now, CAPA/Complaint Handling, insufficient Design Controls, Management Responsibility, Process Controls and Process Validation and Quality Audits have been among the Top 10 deviations.

Zielgruppe

This event has been especially designed for the manufacturers who are subject to the Medical Device legislation and want to become familiar with the practice-oriented implementation of the legal requirements  in the USA and in Europe.

Technical Requirements

We use Webex for our live online training courses and webinars. At www.gmp-compliance.org/training/online-training-technical-information you will find all the information you need to participate in our events and you can check if your system meets the necessary requirements to participate. If the installation of browser extensions is not possible due to your rights in the IT system, please contact your IT department. Webex is a standard nowadays and the necessary installation is fast and easy.

Programm

GMP for Medical Devices - Live Online Training

Gesamtes Programm als PDF herunterladen

Overview about Similarities/Differences between Medicinal Products and Medical Devices
  • Regulatory Submission
  • Guidelines
  • Supervision
Certification Procedure under the European MDR
  • Economic Operators
  • Classification of medical devices
  • Selection of certification procedure
  • Certification by Notified Bodies
Differences between EU and FDA Requirements
  • European Requirements
  • FDA Requirements
  • Differences and common interests
Classification and Premarket Submission of Medical Devices in the USA
  • Classification rules in the USA
  • IDE
  • 510k, PMA
  • De novo, HDE
Q&As
 
GMP-Related Requirements of EN ISO 13485:2016
  • Role of ISO 13485:2016
  • Documented procedure
  • Key requirements
Technical Documentation vs. DHF/DMR 
  • Content of Technical Documentation
  • Technical Documentation as a linking document between production and quality control
  • Change Management – Retests
  • Content of the DHF
  • Relation to the DMR
  • Link to Technical Documentation
  • Audit and inspection findings
Q&As
 
Combination Products 
  • Medical devices versus medicinal products – the key differences
  • The Guidance for Industry and FDA Current Good Manufacturing Practice for Combination Products – an overview
  • Combination Products in the EU – Guidelines and Definitions
  • How to define a combination product in the EU and US
  • Roles of Competent Authorities (CA) and Notified Bodies (NB)
Design Controls 
  • Introduction of regulatory requirements
  • Common aspects/differences regarding the requirements of the ISO 13485 and 21 CFR 820
  • New ISO 13485:2016 requirements
  • How to implement Design Controls in the whole life cycle process
  • Modern concepts of development of products
  • Audit and inspection findings
Qualification and Validation
  • Regulatory requirements (FDA, Standards, GHTF)
  • Risk assessments
  • Qualification
  • Validation
  • Audit and inspection findings
Q&As
 
Regulatory Audits under MDR and MDSAP
  • Purpose of the MDSAP
  • DSAP Audtiting Organisatons
  • Focus point on regulatory audits
  • Unannounced audits by Notified Bodies
CAPA/Complaint Handling
  • Regulatory requirements (EU, FDA, Standards, GHTF)
  • Common aspects/differences regarding the requirements of the ISO 13485 and 21 CFR 820
  • New ISO 13485:2016 requirements
  • CAPA – the motor for continuous improvement
  • Monitoring as a subsystem
  • Interface complaint handling /CAPA System
  • Audit and inspection findings
Q&As

ECA-Member*: € 1690,-
Non ECA Member*: € 1890,-
EU/GMP Inspectorates*: € 945,-
APIC Member Discount*: € 1790,-

Alle Preise zzgl. MwSt. Wichtige Hinweise zur Umsatzsteuer.

* auch unkompliziert per Kreditkarte bezahlbar
American Express Visa Mastercard

icon
Weitere Termine vor Ort
Weitere Termine vor Ort nicht verfügbar
icon
Weitere Termine online
Weitere Termine online nicht verfügbar
icon
Aufzeichnung nicht verfügbar

Haben Sie noch Fragen?

Wir stehen Ihnen für weitere Auskünfte gerne zur Verfügung.
Tel.: +49 6221 84 44 0
E-Mail: info@concept-heidelberg.de

Frau mit Headset

Zurück

Teilnehmerstimmen - das sagen andere über unsere Seminare:

Guter, breit gefächerter Überblick mit interessanten Verknüpfungen zur Praxis,
welche die Theorie super veranschaulicht.”
Marina Kicoranovic, Labor Hartmann GmbH
GMP/Basis-Einstiegsschulung (B 14), September 2023

Die Referenten waren sehr gut! Sie haben sehr klar gesprochen, nur sehr wenige englische Begriffe
verwendet (super) und waren sehr praxisbezogen.”
Astrid Gießler, Regierungspräsidium Karlsruhe
Live Online Seminar - Basiskurs Computervalidierung & Datenintegrität im GxP Umfeld (B 3), Juni 2023

Sehr guter Bezug zur Schulung für einen GMP-Anfänger. Habe mich sehr gut abgeholt gefühlt.”
Dr. Harald Werner, Infraserv GmbH & Co. Höchst KG
GMP-Basisschulung (B 1), Juni 2023

NEWSLETTER

Bleiben Sie informiert mit dem GMP Newsletter von Concept Heidelberg!

GMP Newsletter

Concept Heidelberg bietet verschieden GMP Newsletter die Sie auf Ihren Bedarf hin zusammenstellen können.

Hier können Sie sich kostenfrei registrieren.

Kontakt

Kontaktieren Sie uns

Haben Sie Fragen?

Concept Heidelberg GmbH
Rischerstraße 8
69123 Heidelberg

Tel. :+49622184440
Fax : +49 6221 84 44 84
E-Mail: info@concept-heidelberg.de

zum Kontaktformular