EU GMP-/FDA-compliant Sampling - Live Online Training

7/8 May 2024

Seminar-Nr. 21203


Dr Gerald Kindermann

Dr Gerald Kindermann

GxP Consulting

Dr. Raphael Bar

Dr. Raphael Bar

BR Consulting

Philip Lienbacher

Philip Lienbacher


All times mentioned are CEST.


The aim of this Live Online Training is to discuss the process of the statistical sampling of
  • finished drug products
  • packaging materials (primary and secondary)
  • medical devices
  • starting materials (APIs and excipients)
and to define the prerequisites for implementing a system for reduced sampling and reduced testing for these products.
This course is also intended to give a practical training on the use of the most common sampling standards: ISO 2859-1:1999 and ANSI/ASQ Z1.4. Starting with regulatory and compendial requirements around sampling, this course will also address
  • charting and trending nonconformities and nonconforming items
  • good quality practice around sampling plans
  • Reference and Retention Samples
Participants will learn how to read and to use the standards for selecting a sampling plan with an understanding of the associated producer and consumer risks.
Practical examples and exercises (including polling questions) and Q&A sessions on both days ensure interaction and that all questions are answered.


Sampling of materials is one of the most important processes in pharmaceutical companies. Accordingly, its importance in international guidelines is also high.

Sampling by attributes is a process of inspecting a representative sample of identical product units of product for presence or absence of nonconforming units or nonconformities before accepting or rejecting the whole lot of product. Regulatory agencies require a sampling plan that utilizes basic elements of statistical analysis or provide a scientific rationale for taking a representative sample according to the lot size. In the light of these regulatory requirements, one may wonder whether the √N rule is a statistically valid sampling plan.

According to chapter 6 of the EU GMP Guidelines, the sampling plan used should be appropriately justified and based on a risk management approach.
Representative samples should be taken and recorded in accordance with approved written procedures.

FDA requires as well in the Code of Federal Regulations (21 CFR Part 211.84), that sampling should be done upon statistical criteria.

In the past the Military Standard 105 D was commonly used in the pharmaceutical industry, but this standard has been withdrawn and is now obsolete. Today either the ISO Standard 2859:1-1999 or the ANSI Z1.4 are applied. These standards are widely employed in various types of industries which are required by regulatory authorities to follow a statistically sound sampling plan.


This GMP Education Course is directed at all those employees from quality control units and production units in the pharmaceutical industry who are competent or responsible for sampling, testing and release of starting materials (APIs and excipients), packaging materials (primary and secondary) as well as finished pharmaceutical products. This course is also of interest to personnel from quality assurance and to those employees from API, excipient or packaging material suppliers who want to inform themselves about the requirements of the pharmaceutical industry on the testing of these materials.

The course does not require prior knowledge in sampling and statistics.

Technical Requirements

We use WebEx for our live online training courses and webinars. At www.gmp-compliance.org/training/online-training-technical-information you will find all the information you need to participate in our trainings and you can check if your system meets the necessary requirements to participate. If the installation of browser extensions is not possible due to your rights in the IT system, please contact your IT department. WebEx is a standard nowadays and the necessary installation is fast and easy.


EU GMP-/FDA-compliant Sampling - Live Online Training

Gesamtes Programm als PDF herunterladen

Regulatory and Compendial Requirements around Sampling
  • Principles of sampling plans
  • Regulations: US GMPs, EU GMPs, WHO
  • What types of sampling plans are used for products/materials?
Statistical Sampling and Withdrawing a Sample
  • Sampling Attributes vs. sampling by variables
  • Nonconforming items and nonconformities
  • 100% Inspection vs. Acceptance Sampling
  • Statistical Sampling error
  • Withdrawing a sample
  • Random and stratified sampling
  • Generating a random number with Excel
Acceptance Sampling Plans in ISO-2859-1/ANSI Z1.4
  • How is the standard structured?
  • How to use the single and double sampling plan + explanation of examples
  • Switching rules between Normal-Tightened-Reduced inspections Structure of the Standards
Classification of Nonconformities and allocating AQL to Classes
  • Classification schemes
  • Classification of nonconforming items (Class A, B, C...)
  • Classification of nonconformities (Class A, B, C...)
  • Examples of nonconformities in pharmaceutical preparations (optional)
  • Allocating AQL to various classes
Practical Examples/Exercises: Step-by-step Use of ISO-2859-1/ANSI Z1.4
  • Practical examples for a single- and double-sampling plan (exercises)
  • Practical examples for use of the switching rules
  • Exercise in using tables of sampling of ISO-2859-1
Producer and Consumer Risks in Sampling with ISO-2859-1
  • Ideal OC curve
  • Risk of rejecting a good lot (alpha risk)
  • Risk of accepting a bad lot (beta risk)
  • Determining sampling risks in ISO 2859-1
Exercises with Producer and Consumer Risks in Sampling with ISO-2859-1
  • Acquaintance with risk tables of ISO 2859-1
  • Guided exercises for producer Risk
  • Guided exercises for consumer Risk
  • Sampling risks in a sampling plan
Sampling and Inspection of Packaging Materials
  • Regulations and guidance for packaging and labeling Control
  • Primary packaging: containers and closures:
    - What is inspected?
    - Challenges in inspecting packaging materials
  • Secondary packaging: labels, leaflets and folded boxes:
    - What is inspected?
    - Challenges in inspecting packaging materials
    - Sampling in printing house
    - Sampling in manufacturer’s site
    - Defects in labels
Risks in Sampling
  • Probability of acceptance
  • Operating curve
  • Misconceptions of sampling
  • Determining product and consumer risks in a sampling plan
Sampling according to the WHO
  • Sampling of starting materials
  • Full testing vs. testing for identity
  • Qualified supplier vs. unreliable supplier
  • n, p and r plans
  • Criticism of the sampling plans
Sampling of Powders (APIs and excipients) and Tools for Sampling in a Pharmaceutical Plant
  • Regulatory requirements
  • Risk assessment for sampling
  • Sampling plans/sampling schemes
  • Training for sampling
  • Retention/reference samples
  • Starting material Identity testing
  • Sampling for the purpose of Assay
  • Sampling of raw materials
  • Techniques of drawing samples
  • Prerequisites/requirements for correct sampling
  • Sampling devices and containers
√N rule: its Uses and Misuses
  • Origin of the rule
  • Uses and misuses
  • How confident is it?
How to effectively reduce the Amount of Samples to be tested? (incl. Practical Examples)
  • Reduced testing concepts – how to apply?
  • Internal testing vs. external testing
  • Using the supplier’s CoA instead of in-house testing
  • Use of devices to reduce sampling / testing (e.g. Rapid ID)
  • Use of risk assessment to reduce sampling / testing
  • Practical example walkthrough
Skip-Lot Testing
  • What is skip-lot testing?
  • Sampling plan SkSP-1 for raw materials
  • Sampling plan SkSP-2 for Attributes
  • Skip-lot testing of excipients (USP <1040>)
  • When skip-lot testing is justified
Reference/Retention Samples and Good Quality Practice around Sampling Plans
  • Reference/retention samples
    - Regulations on reference/retention samples
    - Which and how many samples to take?
    - Retention periods for GMP and clinical samples
  • How to document the sampling system within the company? (SOPs, specifications, LIMS)
  • What you should discuss with the supplier
    - Tailgate/satellite samples and pre-delivery samples
    - How to certify homogeneity of materials
Charting and Trending Nonconformities and Nonconforming Items
  • Run chart and control Chart
  • Charting the number of non-conforming items (p Chart and I-MR Charts
  • Charting the number of nonconformities (c chart and I-MR charts)
  • Detecting a trend in your inspection Quality
  • Determining your process average
  • Does your inspection data confirm your AQL?
Sampling for Visual Inspection of Particles in Parenteral Drugs
  • Regulations for sampling for visual inspection
  • Types of particles
  • Probability of detecting a particle
  • Procedure of manual visual inspection (Ph. Eur. 2.9.20 and USP <790>)
  • Types of visual inspections
  • Inspection of hard-to-see
  • AQL sampling after 100% inspection
  • Policy of sampling and inspection
Video Demonstration of Sampling activities
  • Explained videos on sampling and sampling tools
Q&A Sessions
  • Participants are invited to ask questions

Dieses Seminar/Webinar kann nicht gebucht werden. Alternative Termine für dieses Seminar/Webinar und ähnliche Veranstaltungen finden Sie in der Übersicht nach Thema..

Für viele Seminare und Webinare gibt es auch Aufzeichnungen, die Sie jederzeit bestellen und anschauen können. Diese Aufzeichnungen finden Sie in einer themensortierten Liste.

Oder senden Sie uns Ihre Anfrage einfach über das folgende Kontaktformular.

* auch unkompliziert per Kreditkarte bezahlbar
American Express Visa Mastercard

Weitere Termine vor Ort
Weitere Termine vor Ort nicht verfügbar
Weitere Termine online
Weitere Termine online nicht verfügbar
Aufzeichnung nicht verfügbar

Haben Sie noch Fragen?

Wir stehen Ihnen für weitere Auskünfte gerne zur Verfügung.
Tel.: +49 6221 84 44 0
E-Mail: info@concept-heidelberg.de

Frau mit Headset


Teilnehmerstimmen - das sagen andere über unsere Seminare:

"Die Umsetzung mit Memberspot ist wirklich ausgezeichnet gelungen.
Es unterstützt die Wissensvermittlung und gewährleistet auch die richtige Durchführung des Kurses.”
Christian Wagener, WAGENER & CO. GmbH
GMP Basis-Einstiegsschulung (B 1) - Aufzeichnung Online Seminar, April 2024

Guter, breit gefächerter Überblick mit interessanten Verknüpfungen zur Praxis,
welche die Theorie super veranschaulicht.”
Marina Kicoranovic, Labor Hartmann GmbH
GMP/Basis-Einstiegsschulung (B 14), September 2023

Die Referenten waren sehr gut! Sie haben sehr klar gesprochen, nur sehr wenige englische Begriffe
verwendet (super) und waren sehr praxisbezogen.”
Astrid Gießler, Regierungspräsidium Karlsruhe
Live Online Seminar - Basiskurs Computervalidierung & Datenintegrität im GxP Umfeld (B 3), Juni 2023

Sehr guter Bezug zur Schulung für einen GMP-Anfänger. Habe mich sehr gut abgeholt gefühlt.”
Dr. Harald Werner, Infraserv GmbH & Co. Höchst KG
GMP-Basisschulung (B 1), Juni 2023

„Interessante Themen, gut vorgetragen, die eigenen Erfahrungen der Vortragenden helfen, dies noch besser nachzuvollziehen.“ „Gute Gestaltung der Workshops, das Zusammenarbeiten in Gruppen und der Austausch mit anderen hilft sehr.“
Manuela Seibert, Merck, GMP-Leadauditor/in (FA 2), April 2024


Bleiben Sie informiert mit dem GMP Newsletter von Concept Heidelberg!

GMP Newsletter

Concept Heidelberg bietet verschieden GMP Newsletter die Sie auf Ihren Bedarf hin zusammenstellen können.

Hier können Sie sich kostenfrei registrieren.


Kontaktieren Sie uns

Haben Sie Fragen?

Concept Heidelberg GmbH
Rischerstraße 8
69123 Heidelberg

Tel. :+49622184440
Fax : +49 6221 84 44 84
E-Mail: info@concept-heidelberg.de

zum Kontaktformular