header-image

Container-/Closure-Integrity Testing - Live Online Training

Thursday, 24 October 2024 9 .00 - 17.15 h

Seminar-Nr. 20573

Referent:innen

Roland Koch

Roland Koch

Gasporox

Dr. Martin Becker

Dr. Martin Becker

Baxter Oncology

Christof Langer

Christof Langer

OSConsulting

Felix Krumbein

Felix Krumbein

Head ECA Visual Inspection Group

All times mentioned are CEST.

Zielsetzung

Different products and different container types require different testing methods: this event aims at giving an overview of the different CCI testing systems which are applied during production and as part of the quality control system. Apart from technical aspects the regulatory requirements on CCI testing will be highlighted as well as the applicability of inline and offline testing.

Hintergrund

An intact container closure system, which is the sum of packaging components that protect the dosage form, is the pre-requisite for a safe and sterile drug product. The CC system protects the product from microbial contamination and also from exposure to gases or water vapour or the loss of solvent. Container Closure integrity testing is therefore a regulatory requirement and it is part of the whole life cycle of a sterile drug product.
 
Initially this testing was performed as part of the initial development of the packaging system and the system’s suitability verified in stability studies including on-going stability. Over the years, the expectation was raised to perform batch by Batch verification with latest trends to 100% inline or offline testing wherever possible.
 
We will discuss and answer questions like:
  • What are the current and upcoming GMP- and compendial requirements in the US / EU / RoW?
  • Will container closure integrity testing change to 100% inline testing?
  • What does the Annex 1 require?
  • How do we have to define’ tight’?
  • How to set up and defend a CCI control strategy
  • Which testing technologies are available and suitable?
  • CCI testing of vials
  • CCI testing of ampoules

Zielgruppe

This conference is directed at specialists and executives from the areas engineering and production and QA dealing with the implementation and operation of systems for the container/closure-integrity testing of sterile medicinal products.

Technical Requirements

We use Webex for our live online training courses and webinars. At www.gmp-compliance.org/training/online-training-technical-information you will find all the information you need to participate in our events and you can check if your system meets the necessary requirements to participate. If the installation of browser extensions is not possible due to your rights in the IT system, please contact your IT department. Webex is a standard nowadays and the necessary installation is fast and easy.

Programm

Container-/Closure-Integrity Testing - Live Online Training

Gesamtes Programm als PDF herunterladen

Container Closure Integrity Testing of Sterile Drug Products – Requirements, Expectations and Exaggerations
  • Container Closure Integrity during development, qualification and stability testing
  • Regulatory, Pharmacopoeial and GMP requirements
  • System integrity versus container damages
  • Patient risks – do we need batch by batch testing?
  • Industrial best practices
Overview of Container-/Closure-Integrity Testing Technologies
The presentation gives a complete overview of the different aspects of leak testing to do CCIT in the pharmaceutical production. The systems presented can be used for the CCIT of vials, ampoules, syringes, BFS, IV bags, blisters etc.
  • Leak, leak rate and the relevant physical Units
  • Leak test Methods
    • Pressure change methods (vacuum, pressure and LFC)
    • Head Space Analysis using TDLAS
    • Helium Leak Test and other Mass Spectroscopy Systems
    • High Voltage Leak Detection (HVLD)
    • Force Sensing Technology
  • Capabilities and examples of the different Methods
  • How to select the right method
  • How to generate positive controls
Proposal for a 100% CCI Qualification Concept
  • Regulatory requirements
  • CCI Methods
  • Composition and preparation of a qualification kit
  • Execution and evaluation of the qualification
100% inline CCI Testing of Ampoules
  • High Voltage inline testing: method description
  • Integration in the production process
  • Limits of the System
  • Qualification of the System
  • Validation
  • Routine Operation
Residual Seal Force (RSF) & Headspace (HAS) Testing of Vials
  • Setup of the testing System
  • Usage of HAS in product Validation
  • Statistical control by sampling RSF

ECA-Member*: € 990,-
Regular Fee*: € 1190,-
EU/GMP Inspectorates*: € 595,-
APIC Member Discount*: € 1090,-

Alle Preise zzgl. MwSt. Wichtige Hinweise zur Umsatzsteuer.

* auch unkompliziert per Kreditkarte bezahlbar
American Express Visa Mastercard

icon
Weitere Termine vor Ort
Weitere Termine vor Ort nicht verfügbar
icon
Weitere Termine online
Weitere Termine online nicht verfügbar
icon
Aufzeichnung nicht verfügbar

Haben Sie noch Fragen?

Wir stehen Ihnen für weitere Auskünfte gerne zur Verfügung.
Tel.: +49 6221 84 44 0
E-Mail: info@concept-heidelberg.de

Frau mit Headset

Zurück

Teilnehmerstimmen - das sagen andere über unsere Seminare:

Guter, breit gefächerter Überblick mit interessanten Verknüpfungen zur Praxis,
welche die Theorie super veranschaulicht.”
Marina Kicoranovic, Labor Hartmann GmbH
GMP/Basis-Einstiegsschulung (B 14), September 2023

Die Referenten waren sehr gut! Sie haben sehr klar gesprochen, nur sehr wenige englische Begriffe
verwendet (super) und waren sehr praxisbezogen.”
Astrid Gießler, Regierungspräsidium Karlsruhe
Live Online Seminar - Basiskurs Computervalidierung & Datenintegrität im GxP Umfeld (B 3), Juni 2023

Sehr guter Bezug zur Schulung für einen GMP-Anfänger. Habe mich sehr gut abgeholt gefühlt.”
Dr. Harald Werner, Infraserv GmbH & Co. Höchst KG
GMP-Basisschulung (B 1), Juni 2023

NEWSLETTER

Bleiben Sie informiert mit dem GMP Newsletter von Concept Heidelberg!

GMP Newsletter

Concept Heidelberg bietet verschieden GMP Newsletter die Sie auf Ihren Bedarf hin zusammenstellen können.

Hier können Sie sich kostenfrei registrieren.

Kontakt

Kontaktieren Sie uns

Haben Sie Fragen?

Concept Heidelberg GmbH
Rischerstraße 8
69123 Heidelberg

Tel. :+49622184440
Fax : +49 6221 84 44 84
E-Mail: info@concept-heidelberg.de

zum Kontaktformular