header-image

Live Online Training: Confidence in Analytical Results and Measurement Uncertainty

Thursday, 30 September 2021 9 .00 - 16.45 h

Seminar-Nr. 19228

All times mentioned are CEST

Sprecher

Dr Christopher Burgess, Burgess Analytical Consultancy, UK

Zielsetzung

In this new online Training Course, the principles of measurement uncertainty and error budgets will be discussed. You will get to know how to apply these principles in your analytical laboratory. The purpose of course is to
  • Describe the basic principles of measurement uncertainty and error budgets
  • Apply these basic principles to the calibration and qualification of analytical instruments
  • Allow participants to gain experience in applying the techniques to analytical method validation and method transfer.
  • Introduce the Monte Carlo simulation approach for more complex systems

Hintergrund

For many years, measurement uncertainty calculations have been a requirement in ISO 17025 accredited laboratories.  The USP has introduced these ISO concepts into USP General Chapter <1010> Analytical Data—Interpretation And Treatment.  Measurement uncertainty is of key importance in analytical instruments qualification as well as in analytical methods validation and transfer. Therefore everyone who is involved in generating and evaluating analytical results in GMP controlled laboratories or bears the responsibility for these activities must have a thorough understanding of the principles of measurement uncertainty and error budgets.

Zielgruppe

This training is recommended for Laboratory Managers, Supervisors and Analysts in pharmaceutical quality control departments who have responsibility for the validation of analytical test procedures as well as the Calibration and Qualification of Analytical Instruments. Furthermore, this Course will be of interest to personnel from Quality Assurance, Regulatory Affairs and Contract Laboratories.

Technical Requirements

For our Live Online Training Courses and Webinars, we use Cisco WebEx, one of the leading suppliers of online meetings.

At http://www.webex.com/test-meeting.html you can check if your system meets the necessary requirements for the participation at a WebEx meeting and at the same time install the necessary plug-in.  Please just enter your name and email address for the test. If the installation is not possible because of your rights for the computer system, please contact your IT department. WebEx is a standard nowadays and the necessary installation is fast and easy.

Programm

Introduction to the Course

Basics of Measurement Uncertainty
  • Definition of measurement and uncertainty
  • Analytical Procedures (Methods) as Processes
  • Error sources and statistical descriptions
  • Accuracy and Trueness under ISO definitions
  • ICH Q2(R1) and revision in 2021 to (R2) & Q14
  • Approaches to quantifying MU and Error Budgets
  • Quantifying uncertainties with a very simple example; a reference standard solution
  • Shape of errors
  • Statistical assumptions for Error budgets
Measurement Uncertainty in Calibration and Qualification of Analytical Instrumentation
  • Qualification, Calibration & Validation (QCV)
  • Experimental Errors
  • Calibration example of a UV spectrophotometer
    • Wavelength accuracy
    • Sensitivity; DL & QL
Measurement Uncertainty in the Validation of Analytical Methods
  • Holistic approach of MU
  • Case study example; Error Budget Process
  • Step 1: Description of the measurement process
  • Step 2: Specification of the measurand
  • Step 3: Identification of uncertainty sources
  • Steps 4 & 5: Quantification and combination of uncertainties
Measurement Uncertainty without the Maths; an Introduction to Monte Carlo Simulation
  • Monte Carlo Simulation (MCS) modelling
  • Principles behind MCS for MU
  • Example 1: Making a standard solution of a certified reference material (CRM)
  • Example 2: Leachable cadmium determination by Atomic Absorption Spectrometry (AAS)
  • Pros & Cons for MCS
Method Transfer; Success or Failure?
  • Case Study with interactive workshop
Process Performance and Reportable Values
  • What is a reportable value?
  • OOS, OOE & OOT
  • Process performance and process capability
  • ICH precision approach
  • USP <1010>

Dieses Seminar/Webinar kann nicht gebucht werden. Alternative Termine für dieses Seminar/Webinar und ähnliche Veranstaltungen finden Sie in der Übersicht nach Thema..

Für viele Seminare und Webinare gibt es auch Aufzeichnungen, die Sie jederzeit bestellen und anschauen können. Diese Aufzeichnungen finden Sie in einer themensortierten Liste.

Oder senden Sie uns Ihre Anfrage einfach über das folgende Kontaktformular.

* auch unkompliziert per Kreditkarte bezahlbar
American Express Visa Mastercard

icon
Weitere Termine vor Ort
Weitere Termine vor Ort nicht verfügbar
icon
Weitere Termine online
Weitere Termine online nicht verfügbar
icon
Aufzeichnung nicht verfügbar

Haben Sie noch Fragen?

Wir stehen Ihnen für weitere Auskünfte gerne zur Verfügung.
Tel.: +49 6221 84 44 0
E-Mail: info@concept-heidelberg.de

Frau mit Headset

Zurück

Teilnehmerstimmen - das sagen andere über unsere Seminare:

Guter, breit gefächerter Überblick mit interessanten Verknüpfungen zur Praxis,
welche die Theorie super veranschaulicht.”
Marina Kicoranovic, Labor Hartmann GmbH
GMP/Basis-Einstiegsschulung (B 14), September 2023

Die Referenten waren sehr gut! Sie haben sehr klar gesprochen, nur sehr wenige englische Begriffe
verwendet (super) und waren sehr praxisbezogen.”
Astrid Gießler, Regierungspräsidium Karlsruhe
Live Online Seminar - Basiskurs Computervalidierung & Datenintegrität im GxP Umfeld (B 3), Juni 2023

Sehr guter Bezug zur Schulung für einen GMP-Anfänger. Habe mich sehr gut abgeholt gefühlt.”
Dr. Harald Werner, Infraserv GmbH & Co. Höchst KG
GMP-Basisschulung (B 1), Juni 2023

NEWSLETTER

Bleiben Sie informiert mit dem GMP Newsletter von Concept Heidelberg!

GMP Newsletter

Concept Heidelberg bietet verschieden GMP Newsletter die Sie auf Ihren Bedarf hin zusammenstellen können.

Hier können Sie sich kostenfrei registrieren.

Kontakt

Kontaktieren Sie uns

Haben Sie Fragen?

Concept Heidelberg GmbH
Rischerstraße 8
69123 Heidelberg

Tel. :+49622184440
Fax : +49 6221 84 44 84
E-Mail: info@concept-heidelberg.de

zum Kontaktformular